- 供貨總量：
- 發貨期限：自買家付款之日起 天內發貨
- 所在地：陜西 西安
Mono M1 4BB
(Anisotropically Texturized Surface)
單晶硅太陽能電池規范
Mono-crystalline Silicon Solar Cell Specification
電池類型：單晶硅太陽能電池
Cell type: Mono-crystalline silicon solar cell
尺寸規格：156.75mmx156.75mm±0.25mm 205mm±0.25mm(對角線長度)
Dimension: 156.75mmx156.75mm±0.25mm 205mm±0.25mm(Diagonal length)
電池厚度：200μm±20μm
Cell Thickness: 200μm±20μm
正面(－)：氮化硅減反射涂層四根1.0±0.05mm寬度的主柵線之間的間距39mm
Front side(－): Silicon nitride anti-reflection coating Four 1.0±0.05mm wide busbars with distance 39mm
背面(＋)：全表面的鋁背場四根2.0±0.05mm間斷的背電極焊接設計
Back side(＋) : Full surface aluminum back surface field Four 2.0±0.05mm discontinuous soldering pads
●標準測試條件下(Under standard test condition): 1000W/ m2 , AM 1.5 , 25°C
●圖示說明(Illustration): 196→19.6%→實際范圍(actual range)19.60%~19.69%
●規范和數據只供參考，如有更改恕不另行通知Specification and data are for reference only and may change without prior notice.
電性能指標 Electrical Properties
參數：A級 Parameter: Grade A
電池效率/最大功率點測量電池的效率（或最大功率點）依據上文提到的標準(AM 1 .5, 1000 W/m², 25 °C)
Cell efficiency/Pmpp Measured cell efficiency (or Pmpp) according to above mentioned bin criteria (AM 1 .5, 1000 W/m², 25 °C)
分流電阻：>30 Ohm Shunt Resistivity: >30 Ohm
反向逆電流Irev 2<1.5A 偏置電壓-12 V 和溫度25℃ Reverse dark current Irev 2<1.5A at -12 V and 25℃
點擊下圖片即可查看大圖
企業客服請求為您服務
>
>
